Description
The AEG Impact Driver A18FSIDBL0 is sold at WorkKit Supply as the 18V FUSION STEALTH Impact Driver Skin. Price is $399.00 inc GST with free road freight Australia-wide over $250, and orders placed before 1pm AEST are dispatched the same day from Melbourne.
On this page
The AEG FUSION STEALTH Impact Driver delivers high torque and low sound levels in a compact and lightweight design. It’s up to 50% quieter* than the previous model (A18FID). Good news when working in enclosed spaces (under houses, in roof spaces, in cabinets), where sound is amplified. The innovative hydraulic powertrain produces low vibration and steady, extended torque output compared to standard models.
Unlike a traditional hammer and anvil mechanism, the hydraulic powertrain delivers torque through the rapid expansion and compression of hydraulic fluid. With a short body design (only 114mm long), the Impact Driver is easy to operate in tight spaces. The brushless motor generates a maximum 3,000ipm to drive large screws faster into dense materials.
The 4-mode selector provides enhanced control to drive different fasteners and work on various materials (Speed 1 maximum – 700rpm, speed 2 maximum – 1,800rpm, speed 3 – maximum 2,300rpm). Self-tapping mode produces a maximum 1,900rpm to drive smaller, tek screws into metal without overdriving them. The quick-release ¼ (6.35mm) hex collet enables fast bit changes. An in-built tri-beam LED illuminates dark work areas.
This Impact Driver is compatible with any AEG 18V Battery (sold separately). *Test performed to ISO3744:2010 standard, measurements taken while driving screws at high speed. Test performed on 31st July 2025 vs Standard Impact Driver (A18FID).
AEG Impact Driver A18FSIDBL0 key features
At a glance, the headline numbers for the A18FSIDBL0 are:
- Voltage: 18 V
- Torque: 112 Nm
- No Load Speed: 0/700:2/1800:3/2300 RPM
- Tool Reception: 1/4" (6.35mm)
- Impact rate: 0-3,000 IPM
- Tool Weight: 1.1 Kg
AEG Impact Driver A18FSIDBL0 specifications
| Voltage | 18 V |
|---|---|
| Torque | 112 Nm |
| No Load Speed | 0/700:2/1800:3/2300 RPM |
| Tool Reception | 1/4" (6.35mm) |
| Impact rate | 0-3,000 IPM |
| Tool Weight | 1.1 Kg |
| Model number | A18FSIDBL0 |
| Category | Impact Drivers |
What is in the box with the A18FSIDBL0
This item is supplied as a bare tool (skin). Batteries and chargers are listed separately in our AEG batteries and AEG chargers categories.
Battery and charger setup
As a bare tool it needs a separate 18 V AEG battery and charger. Both are stocked in our AEG batteries and AEG chargers categories.
AEG Impact Driver A18FSIDBL0 manual
The official AEG operator manual for the A18FSIDBL0 is published as a PDF: download the A18FSIDBL0 manual. It covers assembly, safe operation, maintenance and service parts.
Related AEG tools
- 18V Brushless Sub Compact 4-Mode Impact Driver Skin
- 18V FUSION 4-Mode Impact Driver Skin
- 18V BRUSHLESS 3-SPEED IMPACT DRIVER 5.0AH KIT
- All Impact Drivers at WorkKit Supply
FAQs about the AEG Impact Driver A18FSIDBL0
What comes with the A18FSIDBL0?
The tool only. Add a battery and charger, or choose a kit version for a ready-to-run package.
How much does the AEG Impact Driver A18FSIDBL0 cost?
It is $399.00 inc GST at WorkKit Supply. Road freight is free over $250, otherwise $12.95, and orders before 1pm AEST on a business day go out the same day from Truganina, Victoria.
What warranty covers the AEG Impact Driver A18FSIDBL0?
AEG covers 18V tools with a 5-year warranty and corded tools and batteries with 3 years. WorkKit Supply adds a 30-day returns policy on every order.
Where can I get spare parts and servicing?
Ask the trade desk via the live chat on this page and we will source A18FSIDBL0 consumables, spare parts or a service agent referral through the AEG network.
What else fits the same battery?
Any 18 V AEG battery in the range fits this tool, so one platform can cover your whole kit. See the full battery range.
About Impact Driver in the AEG range
Impact drivers trade torque for speed and control. Three-speed modes let you drive small screws without stripping heads and then switch up for structural fastening, which is why they do most of the driving on a framing or fit-out job.
WorkKit Supply lists 5 impact drivers options in the AEG range, priced from $189 to $399 inc GST. The AEG Impact Driver A18FSIDBL0 is one of them, and every product page carries its own model number, spec table and manual link so you can compare like for like.
Delivery, freight and returns for the A18FSIDBL0
WorkKit Supply dispatches from Truganina in Melbourne’s west. Orders placed before 1pm AEST on a business day are picked and packed the same day, road freight is free over $250 and a flat $12.95 below that. Melbourne metro is typically next business day, with Sydney, Brisbane, Adelaide and Perth following in two to five business days depending on the carrier run.
If the A18FSIDBL0 is not right for the job, it can be returned within 30 days in as-new condition for a refund or exchange. Faulty items go through the AEG warranty, and freight on a dead-on-arrival replacement is on us.
How long does delivery of the AEG Impact Driver A18FSIDBL0 take?
Same-day dispatch before 1pm AEST, then one business day for Melbourne metro and two to five business days elsewhere in Australia on road freight.
Can I get a tax invoice or trade pricing on the A18FSIDBL0?
Every order includes a GST tax invoice, and trade customers can ask our desk for account pricing on the AEG Impact Driver A18FSIDBL0 and the rest of the AEG range.
Is the AEG Impact Driver A18FSIDBL0 in stock?
Stock on this page updates through the day. If it shows out of stock, the trade desk can give you the next AEG delivery date and take a pre-order over live chat.
Where to buy the AEG Impact Driver A18FSIDBL0
You can buy the AEG Impact Driver A18FSIDBL0 online here with same-day dispatch, or ask the trade desk on live chat for help matching it to the batteries and accessories you already run. The AEG Impact Driver A18FSIDBL0 ships from our Truganina warehouse with a GST invoice in every box.
Reviews
There are no reviews yet.