Description
The AEG Brad Nailer A18FAFNDA15GB0 is sold at WorkKit Supply as the 18V F-RAPID 15GA DA ANGLED BRAD NAILER SKIN. Price is $629.00 inc GST with free road freight Australia-wide over $250, and orders placed before 1pm AEST are dispatched the same day from Melbourne.
On this page
Secure cornices, skirting and other trim pieces faster with cleaner results using the AEG 18V F-RAPID 15GA DA Angled Brad Nailer. It fires 15GA DA angled brad nails into hardwoods and softwoods, leaving behind a consistent finish with clean nail holes for easy filling. The Brad Nailer harnesses a brushless motor to generate a 3-nail/sec cycle rate in bump fire mode.
The high-capacity magazine holds up to 110 15GA DA angled brad nails to reduce downtime from reloading. A dryfire lock-out mode automatically engages to prevent damage to the firing pin caused by dry shots. This Brad Nailer is 15% lighter than the previous AEG model (AFNDA18B-0) for easier handling overhead and less fatigue from large jobs. The smaller nose provides easier access to tight areas.
With no reliance on hoses, gas cartridges or air compressors, this cordless Brad Nailer saves valuable time on setup. It only requires an AEG 18V battery (sold separately) for power. This Brad Nailer is part of AEG’s F-RAPID range of Nailers engineered for trade applications. F-RAPID technology combines a powerful brushless motor, high nail firing rate with low latency and large magazine capacities.
These Nailers also harness powerful driving force to fire nails into hardwoods and various other materials. With no reliance on compressors or fuel, experience cheaper running costs and less maintenance requirements. Battery and Charger sold separately
AEG Brad Nailer A18FAFNDA15GB0 key features
At a glance, the headline numbers for the A18FAFNDA15GB0 are:
- Voltage: 18 V
- Fastener Length: 32/64 mm
- Fastener Collation angle: 15 Ga / DA Brad – 30-34° (1.8) mm
- Capacity: 114
- Weight: 2.8 Kg
AEG Brad Nailer A18FAFNDA15GB0 specifications
| Voltage | 18 V |
|---|---|
| Fastener Length | 32/64 mm |
| Fastener Collation angle | 15 Ga / DA Brad – 30-34° (1.8) mm |
| Capacity | 114 |
| Weight | 2.8 Kg |
| Model number | A18FAFNDA15GB0 |
| Category | Brad Nailers |
What is in the box with the A18FAFNDA15GB0
This item is supplied as a bare tool (skin). Batteries and chargers are listed separately in our AEG batteries and AEG chargers categories.
Battery and charger setup
As a bare tool it needs a separate 18 V AEG battery and charger. Both are stocked in our AEG batteries and AEG chargers categories.
AEG Brad Nailer A18FAFNDA15GB0 manual
The official AEG operator manual for the A18FAFNDA15GB0 is published as a PDF: download the A18FAFNDA15GB0 manual. It covers assembly, safe operation, maintenance and service parts.
Related AEG tools
- 18V F-Rapid 18GA C1 Brad Nailer Skin
- 18V F-RAPID Limited Edition 2-Piece Nailer 4.0AH FORCE KIT
- 18V F-RAPID DA Nailer 5Ah Kit
- All Brad Nailers at WorkKit Supply
FAQs about the AEG Brad Nailer A18FAFNDA15GB0
What comes with the A18FAFNDA15GB0?
The tool only. Add a battery and charger, or choose a kit version for a ready-to-run package.
How much does the AEG Brad Nailer A18FAFNDA15GB0 cost?
It is $629.00 inc GST at WorkKit Supply. Road freight is free over $250, otherwise $12.95, and orders before 1pm AEST on a business day go out the same day from Truganina, Victoria.
What warranty covers the AEG Brad Nailer A18FAFNDA15GB0?
AEG covers 18V tools with a 5-year warranty and corded tools and batteries with 3 years. WorkKit Supply adds a 30-day returns policy on every order.
Where can I get spare parts and servicing?
Ask the trade desk via the live chat on this page and we will source A18FAFNDA15GB0 consumables, spare parts or a service agent referral through the AEG network.
What else fits the same battery?
Any 18 V AEG battery in the range fits this tool, so one platform can cover your whole kit. See the full battery range.
About Brad Nailer in the AEG range
Brad nailers run 18 gauge heads for trim, beading and cabinetry where the hole has to disappear. Depth adjustment and a narrow nose matter more than raw power on finish work.
WorkKit Supply lists 5 brad nailers options in the AEG range, priced from $449 to $915 inc GST. The AEG Brad Nailer A18FAFNDA15GB0 is one of them, and every product page carries its own model number, spec table and manual link so you can compare like for like.
Delivery, freight and returns for the A18FAFNDA15GB0
WorkKit Supply dispatches from Truganina in Melbourne’s west. Orders placed before 1pm AEST on a business day are picked and packed the same day, road freight is free over $250 and a flat $12.95 below that. Melbourne metro is typically next business day, with Sydney, Brisbane, Adelaide and Perth following in two to five business days depending on the carrier run.
If the A18FAFNDA15GB0 is not right for the job, it can be returned within 30 days in as-new condition for a refund or exchange. Faulty items go through the AEG warranty, and freight on a dead-on-arrival replacement is on us.
How long does delivery of the AEG Brad Nailer A18FAFNDA15GB0 take?
Same-day dispatch before 1pm AEST, then one business day for Melbourne metro and two to five business days elsewhere in Australia on road freight.
Can I get a tax invoice or trade pricing on the A18FAFNDA15GB0?
Every order includes a GST tax invoice, and trade customers can ask our desk for account pricing on the AEG Brad Nailer A18FAFNDA15GB0 and the rest of the AEG range.
Is the AEG Brad Nailer A18FAFNDA15GB0 in stock?
Stock on this page updates through the day. If it shows out of stock, the trade desk can give you the next AEG delivery date and take a pre-order over live chat.
Where to buy the AEG Brad Nailer A18FAFNDA15GB0
You can buy the AEG Brad Nailer A18FAFNDA15GB0 online here with same-day dispatch, or ask the trade desk on live chat for help matching it to the batteries and accessories you already run. The AEG Brad Nailer A18FAFNDA15GB0 ships from our Truganina warehouse with a GST invoice in every box.
Reviews
There are no reviews yet.